The Axia Alloys 12″ panoraminc mirror is a game changer for the cockpit of your vehicle. Intended to mount directly in front of the driver or copilot, this mirror has a Tinted sun visor that folds down to block that blinding sun.
The stubby mirror arms included tuck this mirror right up against the mounting bar, and allow you to adjust the overall mounted height of the mirror by pivoting the clamp around the mounting tube.
Adjustable tension on the sun visor as well so that it stays put in the wind even without a windshield.
This is the page to purchase the TINTED sun visor. Solid Black also available
Visor has Machined billet aluminum frame with AR coated scratch resistant plastic shield.
Mounting width is variable by bolting arms to the inside or outside of mirror mounting tabs for widths from 11.5″ to 13.25″ from the outer edge of each mounting clamp.
This mirror is very slighly curved ONLY in the horizontal direction so that you get a nice wide view of what is behind you without distortion.
We offer a lifetime warranty on all our mirrors. FREE REPLACEMENT of your mirror insert.
WEIGHT 1.75 lbs
DIMENSIONS 6 × 4 × 2 in
Black E-Coat, Satin (Raw Aluminum), Silver Anodized
0.75", .875", 1.0", 1.125", 1.25", 1.375", 1.5", 1.625", 1.7", 1.75", 1.85", 1.875", 2.0", 2.25" (+$20.00), 2.375" (+$20.00), 2.5" (+$20.00), 2.625" (+$20.00), 2.75" (+$20.00), 2.875" (+$20.00), 3.0" ($+20.00), 3.25" ($+20.00), No Clamp ($-30.00)
COLOR AND ROLL CAGE SIZE INFORMATION
In addition to our standard strap clamps we now also have what we call Profile Cage Clamps that fit the Polaris Ranger/General, CanAm Defender and Maverick Trails.Because these can not pivot on a round cage we have both inward facing clamps and outward facing. If the clamp is available for your product it will be listed in the clamp size options as “PF-IN” for inward facing clamps or “PF-OUT” for outward facing clamps. These are the same price as our strap clamps.
Black E-Coat – Deep Dark Black color with UV and corrosion protection.
E-coating is our new high tech in-house electrically applied and oven cured paint process with superior UV, salt water, and chemical resistance. E-Coat will last decades and not fade or purple with UV exposure like black anodizing.
Silver Anodized – Bright dip clear anodizing applied (IF YOU WANT SILVER THIS IS THE BEST CHOICE) (Still very bright and shiny but offers corrosion protection and some scratch resistance)
Satin (Raw Aluminum) – A bright and shiny / smooth aluminum machine finish with no coating.
(ONLY BUY THIS ONE IF YOU PLAN TO polish, paint or powder coat)
OEM Roll Cage Tubing Diameters
Pro 2 seat and 4 seat 2.0″
Turbo S 1.75″
XP1000 AND XP4 1000 1.75”
XP Turbo and XP4 Turbo 1.75”
RZR 900 2015 and up 1.75”
2014 and older RZR’s Perimeter 1.75”
2014 and older Polaris Ranger and RZR and RZR S and XP Rear Harness Bar and Rear Bumper crossbars 1.5” (4 seat versions have a 1.25” rear top crossbar as well)
General (Pro Fit cage NOT ROUND use PF-OUT & PF-IN clamps)1.75” top crossbar only (rearview mount)
Ranger (Pro Fit cage NOT ROUND use PF-OUT & PF-IN clamps)1.75” rear harness bar only
Ranger Crew (Pro Fit cage NOT ROUND use PF-OUT & PF-IN clamps) Use 9” Bolt On mirror for rearview
Polaris RZR 170 1.25″
YXZ 1000 1.75″ Perimeter Top crossbars 1.5”
Rhino Perimeter 1.75” Top Crossbars 1.5”
Rhino Steering column 1.5”
Viking and Viking 6 seater 2.0”
Wolverine Perimeter 2.0” Top Crossbars 1.5”
Kawasaki Teryx KRX 1.75
Kawasaki Teryx / Teryx 4 Perimeter 1.875” Top Crossbars 1.7”
Pioneer 1000 1.75”
Pioneer 700 1.625”
Pioneer 500 1.625”
Big Red 1.625”
Wildcat / Wildcat 4 1.75″
Prowler (must have aftermarket cage installed)
Maverick X3 Perimeter 2 seat and 4 seat 1.85″
Maverick X3 Some top crossbars are 1.5″
Maverick X3 Rear harness bar 2.5″
Maverick Sport X XRC (Pro Fit cage NOT ROUND use PF-OUT & PF-IN)1.85” on all other round tubes on cage. 1.5″ on bumpers
Maverick Trail (Profile cage NOT ROUND use PF-OUT & PF-IN)1.85” on all other round tubes on cage. 1.5″ on bumpers